HAT600P Series ATS Controller User Manual Page 26 of 58
No.
Item
Range
Default
Description
Point
higher than this value, then switch
cannot be transferred;
Genset Settings
1
Genset Start Delay
(0~9999)s
1
When genset prepares to start, delay
starts, and when the delay is over,
genset starting signal is sent out;
2
Genset Stop Delay
(0~9999)s
5
When genset prepares to stop, delay
starts, and when the delay is over,
genset starting signal is disconnected;
3
Gen-Gen Start Mode (0~3)
0
0: Cycle Gens
1: Master-Slave Gens
2: Balance Gens Hours
3: Not Used
4
S1 Cycle Work Time (0~9999)min
720
The running time of S1 at the mode of
Cycle Gens;
5
S2 Cycle Work Time (0~9999)min
720
The running time of S2 at the mode of
Cycle Gens;
6
Genset Available
Time
(0~9999)s
120
Time from issuing genset start signal
to gen voltage is normal; if delay is
over and gen voltage is still abnormal,
then genset fault alarm is initiated;
7
Battery Volt Enable (0~1)
0
0: Disable
1: Enable
8
Battery Under Volt
Warn Enable
(0~1)
0
0: Disable
1: Enable
9
Battery Under Volt
Warn
(0~100.0)V
10.0
It occurs when battery voltage is lower
than the set value;
10
Battery Under Volt
Return
(0~100.0)V
10.5
When battery voltage is higher than the
set return value, warning is removed;
11
Battery Under Volt
Delay
(0-3600)s
60
Delay time for battery volt lower than
the warning limit; after delay the under
volt warning occurs;
12
Battery Over Volt
Warn Enable
(0~1)
0
0: Disable
1: Enable
13
Battery Over Volt
Warn
(0~100.0)V
30.0
It occurs when the battery voltage is
higher than the set value;
14
Battery Over Volt
Return
(0~100.0)V
29.5
It shall be removed if the battery
voltage is lower than the set value;
15
Battery Over Volt
Delay
(0-3600)s
60
Delay time for battery volt higher than
the warning limit, when the delay is
over, over volt warning occurs.
Scheduled Start/Stop Settings
1
Schedule Gen
Enable
(0~1)
0
0: Disable
1: Enable
2
Schedule Load
(0~1)
0
0: Off Load
1: On Load
3
Schedule Period
(0~2)
0
0: Monthly
1: Weekly
2: Daily
4
Schedule Monthly
(1~4095)
4095
Bit0: January
Bit1: February
Bit2: March
Bit3: April
Bit4: May
Bit5: June
