Translated by R.Whitehead 10-3-2014 (my best effort – accuracy is not guaranteed)
31 of 38
11. Operation with UniLog 1 / 2 or UniSens-E
The GPS-Logger 2 can be connected directly to the UniLog 1 / 2 or UniSens-E with the
leads stock no. 2720 or 2721.
This result in the following possibilities:
• The recording of all measured values from the UniLog 1 / 2 or UniSens-E on the memory
card of the GPS-Logger 2 synchronously with the other data.
• Display of the the UniLog 1/ 2 or UniSens-E measured values on the ground via Jeti
Duplex telemetry.
• Monitoring of adjustable limit values by Jeti Duplex telemetry.
• Practically unlimited memory expansion for the UniLog 1.
• Evaluation of the UniLog 1 / 2 or UniSens-E data at each waypoint on Google Earth
TM
.
In order to show the battery capacity used from the UniLog 1, the port A2 must be set to
“capacity mAh” in the setup!
Connection to the UniLog 1 / 2 or UniSens-E does not work during FASTest, JR DMSS or
frSky operation. The COM port cannot be used here.