Translated by R.Whitehead 10-3-2014 (my best effort – accuracy is not guaranteed)
20 of 38
SM UniLog 2 +
SM GPS-Logger 2
10. Telemetry Operation
Apart from its functions as data logger the GPS-Logger 2 is also a full telemetry sensor for
different 2.4 GHz remote control systems. From the GPS-Logger 2 the telemetry systems of
Jeti Duplex, Multiplex M-Link, and Graupner HoTT Robbe/Futaba FASSTest S.BUS2, JR
DMSS and FrSky are supported.
The telemetry operation is similar for all supported system: Live data is displayed on the
transmitter or on external display, and with Jeti Duplex and HoTT the GPS-Logger 2 can
also be operated from the transmitter. If the system has a voice output, then this is also
supported by the GPS-Logger 2.
The alarm output depends on the telemetry system. In some systems the GPS-Logger 2
generates the alarms, in others the thresholds are set directly on the transmitter.
Please note the information on this below.
10.1. Jeti Duplex
The GPS-Logger 2 is a complete telemetry sensor for Jeti Duplex 2.4 GHz systems. All
measured values can be transferred live to the ground and displayed on the JetiBox. The
Jeti Expander E4 for the connection of up to 4 sensors is supported.
From firmware v1.06 the new Jeti Duplex EX protocol is also supported. So now display is
possible on the JetiBox Profi or the new transmitters. Please learn about this new display
capability in the instructions for the JetiBox Profi.
10.1.1. Operation of the GPS-Logger 2 with the JetiBox
After the start of transmission the JetiBox is changed to Mx
for the attached sensors.
A press the
on the
▼ key changes to the GPS-Logger 2.
During initialisation you see start-up screen then the
measured data is displayed.
If at start-up an attached UniLog 1 / 2 is detected, the
starting screen displays accordingly.
As soon as the first screen with measured data appears, the
different data screens can be selected with presses of
◄
and
► keys.
A pressure on the key
▲ starts the recording of data in the
GPS-Logger 2, which is indicated by an audible signal.
A
further pressure on
▲ terminates the recording.
A simultaneous long pressure on the keys
◄ and ► changes between the display of Live /
MAX / MIN values.
< - Mx
v
Firmware v1.13
SM GPS-Logger 2
A 123.4 km / h 95
o
221.8 m +12.8 m / s
