SM Modellbau gps-logger 2 Скачать руководство пользователя

Страница: 38 / 38

Translated by R.Whitehead 10-3-2014 (my best effort – accuracy is not guaranteed)

38 of 38

14. Version history

Here you will find all firmware versions and the changes to the previous version.
You can find the current version of your GPS-Logger 2 firmware w

ith our software “SM GPS-

Konverter

” or the UniDisplay.

Version

Date

Comment

1.13

02-2014

1 Introduction of the GPS-Logger 2.
2 Telemetry: automatic scan for HoTT / MPX / Jeti has been

removed because there were always problems with modified
protocols.



HoTT / MPX / Jeti are now selected and fixed as Futaba and



default after update is HoTT, if Futaba or JR were not already

chosen



Jeti and M-Link users must in any case select the telemetry

after the update.

3  FrSky telemetry added (only S.Port protocol.
4  Jeti EX: values can be selected individually for transmission
5  HoTT: with the new receivers with integrated sensors, data is

transferred faster

6 FASSTest: distance is initialised by the transmitter after 3D fix.
7 After 3D fix wait for stable readings, orange and green LED at

the same time (up to a maximum of 60 seconds).

8 With Vario there is an adjustable factor to increase the

sensitivity of the sound on some telemetry systems.

9 HoTT: the Vario range of -0.1 to -0.5 m/s is skipped, since the

transmitter produces no sound here.

10 With each telemetry the modified Vario value is now transmitted

(



sound,



threshold,



factor).

Содержание gps-logger 2







































Результаты поиска

Содержание gps-logger 2

Отзывы:

Похожие инструкции для gps-logger 2

Бренды по названию

Популярные бренды

SM Modellbau gps-logger 2, Руководство по эксплуатации

Результаты поиска

Содержание gps-logger 2

Отзывы:

Похожие инструкции для gps-logger 2

Бренды по названию

Популярные бренды