Translated by R.Whitehead 10-3-2014 (my best effort – accuracy is not guaranteed)
17 of 38
Live data display screen 3:
A further press of
“Enter”
moves to the third screen with more
data.
“RxSpannung” is the measured receiver voltage.
“Datenrate” shows the current recording rate.
Then the current status of satellites and GPS.
“ENL” is the value from the motor noise sensor
“g” indicates the three acceleration values in the X / Y / Z axes.
The last line shows the servo pulse measured at the Rx port.
Setup:
Here the menu for all settings of the GPS-Logger 2 appears.
In the second line is the firmware version of the GPS-Logger 2
and also the serial number.
Move through the menu options with
“Plus”
and
“Minus”
, and
select the appropriate point with
“Enter”
.
Depending on the telemetry used, there is still a menu point 4 for
telemetry settings
Settings screens 1 - 4:
Here the settings of the GPS are summarized.
Move through the menu options with
“Plus”
and
“Minus”
, and
select the appropriate point with
“Enter”
. The arrow then
becomes a Dot and the selected value can be changed with
“Plus”
and
“Minus”
.
A press on
“Esc”
or
“Enter”
stores the
change.
For
the individual points see also
6
.4. „
