Translated by R.Whitehead 10-3-2014 (my best effort – accuracy is not guaranteed)
29 of 38
10.5 JR Propo DMSS
The GPS-Logger 2 can also be used with the JR Propo DMSS telemetry. Currently the JR
Telemetry has no GPS, therefore in this version only the transfer of height and Vario is
possible. GPS data such as speed and coordinates are to be added later.
The GPS-Logger 2 is connected like any other sensor to the sensor slot of the receiver and
transfers the following data:
>Luftdruck
,
Höhe
, Vario (pressure, height, Vario) (sensor address 0x03 "Pressure/Altitude")
No more sensors occupying the same addresses can be connected. For the free addresses,
further sensors can easily be plugged into the receiver in parallel to GPS-Logger 2 with a Y
cable.
We tested the connection with the XG8 transmitter firmware version 0001-0012 and the
RG831B receiver.
10.5.1. Presentation on the Transmitter
All values can be displayed
directly, and the sequence is
freely selectable.
10.5.2. Alarms
In principle with JR DMSS the alarms are defined in the transmitter. The GPS-Logger has no
way to directly trigger an alarm on the transmitter. All alarm thresholds and also Vario tone
generation are therefore set in the transmitter.