Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by
ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by
ŠKODA AUTO A. S.
�
– Release with a small screwdriver the upper cover of the mobile
phone console with mobile phone carrier from the catches
-arrows-.
– Unscrew fixing screws -3- (1.5 Nm) of the mobile phone holder
-1-.
– Remove glove compartment on front passenger side ⇒ Body
Work; Rep. gr. 70 .
– Unhook the mobile phone holder -1- downwards and discon‐
nect plug connections.
– Release screw -arrow- (1.5 Nm) and remove the cover -2- of
the locking plate.
– When removing the locking plate -2- remove the radio -1-
⇒ page 33
.
Installing
The installation occurs in reverse order.
4.6
Removing and installing the control unit
for the mobile phone operating electron‐
ics - J412- (vehicles up to CW 44/08)
Note
The control unit for the mobile phone operating electronics - J412-
cannot be exchanged with the control units mounted as of CW
45.08 (new dash panel insert) see ⇒ Electronic Catalogue of
Original Parts .
Removing
Left-hand drive vehicles:
– Remove front passenger seat ⇒ Body Work; Rep. gr. 72 .
Right-hand drive vehicles:
– Remove the driver's seat ⇒ Body Work; Rep. gr. 72 .
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
58
Rep. gr.91 - Radio, telephone, navigation
