Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by
ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by
ŠKODA AUTO A. S.
�
– Remove rubber cap (the larger one) for headlight.
Right-hand drive in right-hand traffic
– Move the levers connected with each other on the left and right
of the bulb -arrows- out of the position -A- into the position
-B-.
Left-hand drive in left-hand traffic
– Move the levers connected with each other on the left and right
of the bulb -arrows- out of the position -A- into the position
-B-.
Note
When installing the rubber caps, pay attention to the correct fit‐
ting. Water ingress destroys the headlight.
1.7.3
Ungluing a halogen headlight for left-
hand traffic - vehicles up to MY 08 and
Octavia Tour
The halogen headlights should have self-adhesive foil glued over
them when driving in countries which drive on the left thereby
preventing blinding of the drivers travelling in the opposite direc‐
tion.
Note
♦
The headlights must be cleared of dirt and de-greased, e.g.
with degreased white spirit solution, before sticking the foil.
♦
When cleaning and gluing foils, the lens must remain cold for
safety reasons.
Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
106
Rep. gr.94 - Lights, bulbs, switches - exterior