Install bicycle carrier
Fig. 55
Install bicycle carrier
First read and observe the introductory information and safety warn-
ings on page 61.
›
Position the approved bicycle carrier on the cross member.
›
Remove the screw
A
» Fig. 55
a little and push the frame side rail (alu-part) to-
wards the cross member until the socket latches.
›
Insert the screw
A
into the nut.
›
Undo the screw
B
on the movable part of the bicycle carrier and unscrew.
›
Place the movable part of the fixture, depending on the size of the vehicle, in
one of the possible positions so that the bicycle does not touch the boot lid. We
recommend to place the moveable part of the fixture in such a position that 7
holes are visible between the screw
A
and the moveable part.
›
Insert the screw
B
into the desired position and tighten.
Put bicycle into the bicycle carrier
Fig. 56
Put in the bicycle/example fastening the front wheel
First read and observe the introductory information and safety warn-
ings on page 61.
›
Remove the front wheel of the bicycle before installing it.
›
Slacken the quick tension jack on the fixing axle of the bicycle carrier and adjust
according to the width of the bicycle fork.
›
Fit the bicycle fork onto the fixing axle and tighten with the quick tension
jack
» Fig. 56
-
.
›
Position the left pedal of the bicycle forward, in order to attach the front wheel
more easily.
›
Undo the screw
A
» Fig. 55
on page 62 and push the bicycle carrier to the left
together with the fastened bicycle to prevent a collision between the steering
wheel and the side window of the luggage compartment.
›
Carefully guide the boot lid downwards without letting go of it. Check whether
there is sufficient room between the steering bars and the rear window. If nec-
essary, adjust the position of the movable part of the bicycle carrier to prevent a
collision
» page 62
.
›
It is best to store the removed front wheel between the crank of the left pedal
and the bicycle frame, attach it with a strap to the front fork
» Fig. 56
-
and/or
to one of the fixing points.
›
The second carrier is installed and the bicycle is secured in a similar way.
Secure the stability of the bicycles with a belt
Fig. 57
Securing bicycles
First read and observe the introductory information and safety warn-
ings on page 61.
›
To slacken the rubber part of the clamp, push both parts against each other and
open the clamp.
62
Using the system
Содержание 2013 Roomster
Страница 1: ...SIMPLY CLEVER ŠKODA Roomster Owner s Manual ...
Страница 8: ...Fig 1 Cockpit 6 Using the system ...
Страница 212: ......
Страница 213: ......