Cooling system on/off
Set blower speed
The buttons/control dial
Setting the blower speed
Interior temperature sensor
Automatic mode
De-mist or de-ice the windshield
Air flow to the windows
Air flow to head
Air flow in the footwell
Recirculated air mode
Switch cooling system on/off
Note
The interior temperature sensor
11
» Fig. 84
is located in the bottom part of the
device. Do not stick anything on or cover the sensor, otherwise it could have an
unfavourable effect on the Climatronic.
automatic mode
First read and observe the introductory information given on page 81.
The automatic mode is used in order to maintain a constant temperature and to
demist the windows in the interior of the car.
Switching on
›
Set a temperature b18 °C and +29
℃
.
›
Move the air outlet vents
3
» page 75
and
4
so that the air flow is directed
slightly upwards.
›
Press the button
AUTO
12
» Fig. 84
on page 81;
is shown in the display.
Automatic mode is switched off by pressing one of the buttons for the air distri-
bution or by increasing/decreasing the blower speed. The temperature is never-
theless regulated.
8
9
10
11
12
13
14
15
16
17
18
Setting the temperature
First read and observe the introductory information given on page 81.
›
The required interior temperature can be set with the control dial
1
» Fig. 84
on page 81 after switching on the ignition.
The interior temperature can be set b18 °C and +29
℃
. The interior tem-
perature is regulated automatically within this range. If you select the tempera-
ture below +18
℃
, “LO” appears in the display. If you select the temperature high-
er than +29
℃
, “HI” appears in the display. In both limit positions the Climatronic
operates at maximum cooling or heating capacity, respectively. The temperature
is not controlled in this case.
Lengthy and uneven distribution of the air flow out of the vents (especially
around the feet) and large differences in temperature, for example, when getting
out of the vehicle, can cause susceptible individuals to catch a cold.
Recirculated air mode
First read and observe the introductory information given on page 81.
Recirculated air mode prevents polluted air outside the vehicle from getting into
the vehicle, for example when driving through a tunnel or when standing in a
traffic jam.
Switching on
›
Press the button
17
» Fig. 84
on page 81; the symbol
appears in the dis-
play.
Switching off
›
Press the button
17
» Fig. 84
on page 81 again and the symbol
disap-
pears from the display.
WARNING
Do not leave recirculated air mode on over a longer period of time, as “stale”
air can cause fatigue of the driver and passengers, reduce attention levels and
also cause the windows to mist up. The risk of having an accident increases.
Switch off recirculated air mode as soon as the windows start to mist up.
82
Using the system
Содержание 2013 Roomster
Страница 1: ...SIMPLY CLEVER ŠKODA Roomster Owner s Manual ...
Страница 8: ...Fig 1 Cockpit 6 Using the system ...
Страница 212: ......
Страница 213: ......