Some adapters include the button
in addition to the button
SOS
A
» Fig. 87
.
After pressing this button for 2 seconds, the number 112 (Emergency call) is dial-
led.
Connecting the mobile phone to the hands-free system
First read and observe the introductory information given on page 84.
To connect a mobile phone with the hands-free system, the two devices must be
paired. Detailed information on this is provided in the operating instructions for
your mobile phone.
The following steps must be carried out for the connection.
›
Activate Bluetooth
®
and the visibility of your mobile phone on your telephone.
›
Switch on the ignition.
›
Select the
Phone
-
New user
menu in the information display and wait until the
control unit has completed the search.
›
Select your mobile phone from the menu of the units found.
›
Confirm the PIN
1)
.
›
If the hands-free system announces (as standard
SKODA_BT
) on the display of
the mobile phone, enter the PIN
1 )
within 30 seconds and wait, until the connec-
tion is established
2)
.
›
After terminating the connection, confirm the creation of a new user profile in
the information display.
If there is no free space available to create a new user profile, delete an existing
user profile.
During the connecting procedure, no other mobile phone may be connected with
the hands-free system.
Up to four mobile phones can be paired with the hands-free system, whereby on-
ly one mobile phone can communicate with the hands-free system.
The visibility of the hands-free system is automatically switched off 3 minutes af-
ter the ignition is switched on and is also deactivated when the mobile phone has
connected to the hands-free system.
Restoring the visibility of the hands-free system
If you have not managed to connect your mobile phone with the hands-free sys-
tem within 3 minutes of switching on the ignition, the visibility of the hands-free
system can be reestablished for 3 minutes in the following ways.
›
By turning the ignition off and on.
›
By turning voice control off and on.
›
Through the
Bluetooth
-
Visibility
menu item in the information display.
Creating a connection with an already paired mobile phone
After switching on the ignition, the connection is automatically established for
the already paired mobile phone
2)
. Check on your mobile phone if the automatic
connection has been established.
Disconnecting the connection
›
By withdrawing the ignition key.
›
By disconnecting the hands-free system in the mobile phone.
›
By disconnecting the user in the
Bluetooth
-
User
menu item in the information
display.
Solving connection problems
Check the operating status of the mobile phone if the system reports
No paired
phone found
.
›
Is the mobile phone switched on?
›
Is the PIN code entered?
›
Is Bluetooth
®
active?
›
Is the visibility of the mobile phone active?
›
Has the mobile phone already been paired with the hands-free system?
Note
■
If a suitable adapter is available for your mobile phone, only use your mobile
phone in the adapter inserted in the telephone mount so that the radiation in the
vehicle drops to a minimum.
■
Placing the mobile phone in the adapter inserted in the telephone mount en-
sures optimum sending and receiving power.
1)
Depending on the Bluetooth
®
version on the mobile phone, an automatically generated 6-digit PIN is
either displayed or the PIN
1234
has to be entered manually.
2)
Some mobile phones have a menu, in which the authorisation for establishing a Bluetooth
®
connec-
tion is completed by inputting a code. If the authorisation input is required, it must always be per-
formed when re-establishing the Bluetooth connection.
87
Communication and multimedia
Содержание 2013 Roomster
Страница 1: ...SIMPLY CLEVER ŠKODA Roomster Owner s Manual ...
Страница 8: ...Fig 1 Cockpit 6 Using the system ...
Страница 212: ......
Страница 213: ......