WARNING
■
Never use the temporary spare wheel if it is damaged.
■
If the dimensions or design of the temporary spare wheel differ from the fit-
ted tyres, never drive faster than 80 km/h (or 50 mph).
■
Avoid accelerating at full throttle, sharp braking and fast cornering.
CAUTION
Observe the instructions on the warning label attached to the spare wheel.
Full wheel trim
First read and observe the introductory information and safety warn-
ings on page 169.
Pulling off
›
Hook the clamp found in the vehicle tool kit into the reinforced edge of the
wheel trim.
›
Push the wheel wrench through the clamp, support on the tyre and pull off the
wheel trim.
Install
›
Press the wheel trim onto the wheel rim at the designated valve opening.
›
Then press the trim into the wheel rim until its entire circumference locks cor-
rectly in place.
CAUTION
■
Only apply hand pressure, do not hit the full wheel trim! Avoid heavy impacts
when the trim has not yet been inserted into the wheel rim. This could cause
damage to the guide and centring elements of the trim.
■
Make sure that the anti-theft wheel bolt is mounted in the bore in the area near
the valve
» page 180
,
Securing wheels against theft
.
■
If
wheel trims
are retrofitted it must be ensured that an adequate flow of air is
assured to cool the brake system.
Wheel bolts
Fig. 138
Remove the cap
First read and observe the introductory information and safety warn-
ings on page 169.
Pulling off
›
Push the extraction pliers sufficiently far onto the cap until the inner catches of
the pliers are positioned at the collar of the cap
» Fig. 138
.
›
Remove the cap.
Install
›
Push the caps onto the wheel bolts up to the stop.
The wheel bolt caps are housed in a plastic box in the spare wheel or in the stor-
age space for the spare wheel.
173
Wheels
Содержание 2013 Roomster
Страница 1: ...SIMPLY CLEVER ŠKODA Roomster Owner s Manual ...
Страница 8: ...Fig 1 Cockpit 6 Using the system ...
Страница 212: ......
Страница 213: ......