Adjustment of the safety partition
Fig. 78
Top/lower support of the safety partition
First read and observe the introductory information and safety warn-
ings on page 71.
Only valid for some countries.
›
Raise the loading floor part behind the safety partition.
›
On each side in the upper area of the body, undo and remove a bolt
» Fig. 78
-
and undo and remove a bolt in the lower area
» Fig. 78
-
.
›
Move the safety partition into the required position. Ensure it is always move
the same distance- the same number of holes on both sides both upwards and
downwards.
›
On each side in the upper area of the body, undo and remove a bolt and undo
and remove a bolt in the lower area.
›
Have the
tightening torque
of the bolts
checked
with a torque wrench as soon
as possible. The tightening torque must be 20 Nm.
›
Change the position of the cover of the luggage compartment floor behind the
safety partition so that it lines up with the new position of the safety partition.
›
Fold back the loading floor part.
Emergency release of the loading area door
Fig. 79
Emergency unlocking of the
loading area door
First read and observe the introductory information and safety warn-
ings on page 71.
If there is a fault in the central locking, you can unlock the loading area door as
follows:
›
Pull the control cable towards you and pull on it.
›
Press on the loading area door to open it.
›
Press the control cable back again.
Interior lighting
Fig. 80
Interior light - Praktik
First read and observe the introductory information and safety warn-
ings on page 71.
Switching on
›
Place the cover glass in the position
» Fig. 80
.
73
Seats and stowing
Содержание 2013 Roomster
Страница 1: ...SIMPLY CLEVER ŠKODA Roomster Owner s Manual ...
Страница 8: ...Fig 1 Cockpit 6 Using the system ...
Страница 212: ......
Страница 213: ......