SimTech Maxitrol GV60, Руководство по устранению неисправностей

Страница: 32 / 72

SW1 Button
Step Motor “X6”
8 Pin Harness “X5”
ON/OFF Switch “X4”
Flame Sensor “X3”
Ignitor “X2”
Ground “X1”
Power Supply “X1”
Fan Kit “X10”
Light Kit “X11”
INTEGRATED FIREPLACE CONTROL (IFC)
Error codes
- All error codes are displayed on one a set of
three LEDs located beside the SW1 switch.
-
Low battery
: When backup battery is under 4V the RED LED
light (located beside the SW1 switch) will pulse steadily. A double
beep will be made by the IFC whenever a command is made
when backup batteries are below 4V.
-
Flame sense problem
: If the pilot flame is not detected or
the flame sense system is not satisfied the RED LED light will
pulse with 2 flashes until corrected.
- Lockout : If three trials for ignition fail the RED LED indicator
will pulse three times in intervals. To clear lockout power cycle
the IFC.
Error code LED
SW1
32
SUREFIRE ELECTRONIC IGNITION SYSTEM
S.I.T. PROFLAME 2 TROUBLESHOOTING
SimTech Proflame II