Simrad ME70 - REV C, Руководство оператора

Страница: 65 / 112

Operational procedures
4
Method 2:
a Click the middle of the
TVG
button to open the submenu.
b Click on any TVG setting to select it.
Beam mode procedures
This section describes how to choose, administer and edit beam modes on the ME70.
Topics
• Selecting beam mode for operational use on page 63
• Creating a new beam mode on page 64
• Editing a new or existing beam mode on page 65
• Deleting a beam mode that is no longer required on page 66
Selecting beam mode for operational use
Purpose
The ME70 allows you to create and edit beam modes. Each beam mode contains specific
parameters that define the properties of the mode; number of beam sectors, mean
characteristics, frequencies etc.
Description
The currently selected beam mode is identified in the
middle of the button, while the four buttons (two on
each side, identified with the numbers 1 through 4)
allow you to select the top four beam modes that have been defined.
To select from the whole range of beam modes, click on the middle button and select
from the context menu that appears.
To create and edit beam modes, see the
Beam Mode Administration
dialog box.
Related topics
• Beam mode procedures on page 63
• Selecting beam mode for operational use on page 63
• Creating a new beam mode on page 64
• Editing a new or existing beam mode on page 65
• Deleting a beam mode that is no longer required on page 66
• Exporting and importing beam mode XML files on page 66
Procedure
1 Observe the
Main
menu. It is located on the right hand side of the ME70
presentation.
2
Observe the large
Beam Mode
button at the top of the
Main
menu.
378945/B
63