Simrad ME70 - REV C, Руководство оператора

Страница: 60 / 112

Simrad ME70
Related topics
• Echogram markers on page 86
• Active menu on page 97
Procedure
1 Click the
Active
icon.
This icon is located under the
Main
menu. It is
used to open the
Active
menu.
2 Click
Echogram
to open the
Echogram
dialog box.
The
Echogram
dialog box allows you to set up the parameters controlling the
echogram presentation. The three tabs control the horizontal lines, the echogram
type with applied TVG, and how sample data are converted to pixel data.
Tip
You can also open this dialog box from the short-cut menu in the Echogram view.
3 On the
Lines
tab, observe the various lines that can be applied.
4
Click either
Bottom line
or
White line
to select which line to show.
5 Click
OK
to save the current settings and close the dialog box.
Range procedures
These procedures explain how to change the vertical range, that is how to control the
depth to be shown by the echogram.
Topics
• Choosing start depth on page 59
• Choosing the vertical range on page 59
58
378945/B