Simrad ME70 - REV C, Руководство оператора, Страница: 86 / 112

Simrad ME70
Single Target Position field
The Single Target Position field is normally located in the top left corner of the channel
view. To open the field, click on the grey border line and drag it sideways.
Description
This field shows the position within the beam of the
detected single echoes for the current ping (largest
circles) and the three previous pings (smaller circles),
all in the active layer. The colours used to display this
information are determined from current target strength
(TS) value and the settings in the
Colour Scale
dialog box.
Tip
If you place the cursor inside the field, a small yellow label will appear to give you
a detailed read-out of certain information. The
Tooltip
dialog box defines which
information that will be shown.
If you press the right mouse button with the cursor position within this field, a dedicated
short-cut menu will appear.
Related topics
• Single Target Position short-cut menu on page 100
84
378945/B