Simrad ME70 - REV C, Руководство оператора

Страница: 102 / 112

Simrad ME70
Single Target Position short-cut menu
The
Single Target Position
short-cut menu allows you
to control the properties of the Single Target Position
presentation. It opens when you right-click in the Single
Target Position presentation.
1
Single Target Detection
The
Single Target Detection
dialog box is used to set the operational parameters for
detecting single targets within the active layer.
2
Colour Scale
The purpose of the
Colour Scale
dialog box is to change the dynamic range of the
colour scale.
3
Configure Window
The
Configure Window
dialog box is used to set which views to show in the active
window.
4
Hide View
The
Hide View
function hides the view from which the command was chosen.
5
Maximize (Window)
The
Maximize Window
function allows you to enlarge the currently selected view.
Single Target Histogram short-cut menu
The
Single Target Histogram
short-cut menu allows you
to control the properties of the Single Target Histogram
presentation. It opens when you right-click in the Single
Target Histogram presentation.
1
Histogram
This
Histogram
dialog box is used to set parameters for
the histogram displayed in the Single Target Histogram view.
2
Single Target Detection
The
Single Target Detection
dialog box is used to set the operational parameters for
detecting single targets within the active layer.
3
Colour Scale
The purpose of the
Colour Scale
dialog box is to change the dynamic range of the
colour scale.
4
Configure Window
The
Configure Window
dialog box is used to set which views to show in the active
window.
5
Hide View
The
Hide View
function hides the view from which the command was chosen.
100
378945/B