Simrad ME70 - REV C, Руководство оператора

Страница: 30 / 112

Simrad ME70
4 During recording, click
Split
on the
Record
submenu.
This will close down the current data file being recorded, and start a new. This
feature allows you to limit the file sizes manually.
5 To play back the raw data files, see Replaying raw data on page 45.
Selecting beam mode
Purpose
The ME70 allows you to create and edit beam modes. Each beam mode contains specific
parameters that define the properties of the mode; number of beam sectors, mean
characteristics, frequencies etc.
Description
The currently selected beam mode is identified in the
middle of the button, while the four buttons (two on
each side, identified with the numbers 1 through 4)
allow you to select the top four beam modes that have been defined.
To select from the whole range of beam modes, click on the middle button and select
from the context menu that appears.
To create and edit beam modes, see the
Beam Mode Administration
dialog box.
Related topics
• Beam mode procedures on page 63
• Selecting beam mode for operational use on page 63
• Creating a new beam mode on page 64
• Editing a new or existing beam mode on page 65
• Deleting a beam mode that is no longer required on page 66
• Exporting and importing beam mode XML files on page 66
Procedure
1
Observe the
Main
menu. It is located on the right hand side of the ME70
presentation.
2 Observe the large
Beam Mode
button at the top of the
Main
menu.
3 Click one of the numbers to select one of the four most recent beam modes.
Tip
The four numbers in the
Beam Mode
button at the top of the
Main
menu will select
the four beam modes listed at the top of the
Beam Modes
list in the
Beam Mode
Administration
dialog box. This list is sorted alphabetically. To control which
modes to choose using the four numbers, name your beam modes accordingly, for
example by means of prefixes.
28
378945/B