Simrad ME70 - REV C, Руководство оператора

Страница: 66 / 112

Simrad ME70
3 Click one of the numbers to select one of the four most recent beam modes.
Tip
The four numbers in the
Beam Mode
button at the top of the
Main
menu will select
the four beam modes listed at the top of the
Beam Modes
list in the
Beam Mode
Administration
dialog box. This list is sorted alphabetically. To control which
modes to choose using the four numbers, name your beam modes accordingly, for
example by means of prefixes.
4 Click the centre button to select a new beam mode from a submenu.
Note
When a new mode is selected, the program will terminate the current normal
operation and return to inactive. Normal operation must then be selected to use
the new mode.
Creating a new beam mode
Purpose
This procedure explains how to create a new beam mode.
Related topics
• Beam mode procedures on page 63
• Selecting beam mode for operational use on page 63
• Creating a new beam mode on page 64
• Editing a new or existing beam mode on page 65
• Deleting a beam mode that is no longer required on page 66
• Exporting and importing beam mode XML files on page 66
Procedure
1 Observe the
Main
menu. It is located on the right hand side of the ME70
presentation.
2
Click the
Setup
icon.
This icon is located under the
Main
menu. It is
used to open the
Setup
menu.
3 Click
Beam Mode Adm
to open the
Beam Mode
Administration
dialog box.
The
Beam Mode Administration
dialog box allows you to create and delete beam
modes for the ME70 system. By means of the
Beam Mode
dialog box you can also
view and edit the beam modes.
4
In the
Beam Mode Administration
dialog box, click
New
.
64
378945/B