manualshive.com logo in svg

Silicon Laboratories BGM11S Series, Руководство пользователя, Страница: 90 / 94

Поделиться
Скачать
Silicon Laboratories BGM11S Series Скачать руководство пользователя страница 90

11.  Certifications

11.1  Bluetooth

The BGM11S Bluetooth Declarion ID is: D033250.

11.2  CE

The BGM11S module is in conformity with the essential requirements and other relevant requirements of the Radio Equipment Directive
(RED) (2014/53/EU).
Please note that every application using the BGM11S will need to perform the radio EMC tests on the end product according to EN 301
489-17.

The conduced test results can be inherited from the modules test report to the test report of the end product using BGM11S. EN300328
radiated spurious emission test must be repeated with the end product assembly. Test documentation and software for the EN 300 328
radiated spurious emissions testing can be requested from the Silicon Labs support.

A formal DoC is available via 

www.silabs.com

11.3  FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesirable operation.

Any changes or modifications not expressly approved by Silicon Labs could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specif-
ic operating instructions for satisfying RF exposure compliance. This transmitter meets both portable and mobile limits as demonstrated
in the RF Exposure Analysis and SAR test report. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter except in accordance with FCC multi-transmitter product procedures.

OEM Responsibilities to comply with FCC Regulations:

The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance
with FCC multi-transmitter product procedures.

OEM integrator is responsible for testing their end-product for any additional compliance requirements required with this module instal-
led (for example, digital device emissions, PC peripheral requirements, etc.).

Important Note:

In the event that the above conditions cannot be met (for certain configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM inte-
grator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

End Product Labeling

The BGM11S Bluetooth module is labeled with its own FCC ID. If the FCC ID is not visible when the module is installed inside another
device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In
that case, the final end product must be labeled in a visible area with the following:

"Contains Transmitter Module FCC ID: QOQ11"

Or

"Contains FCC ID: QOQ11"

The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or
change RF related parameters in the user manual of the end product.

BGM11S Blue Gecko 

Bluetooth

 

®

 SiP Module Data Sheet

Certifications

silabs.com

 | Building a more connected world.

Rev. 1.0  |  90

Содержание BGM11S Series































































































Отзывы:

Нет отзывов