
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Start up time
t
IDAC_SU
Output within 1% of steady state
value
—
5
—
μs
Settling time, (output settled
within 1% of steady state val-
ue)
t
IDAC_SETTLE
Range setting is changed
—
5
—
μs
Step value is changed
—
1
—
μs
Current consumption in EM0
or EM1
I
IDAC
Source mode, excluding output
current
—
8.9
13
μA
Sink mode, excluding output cur-
rent
—
12
16
μA
Current consumption in EM2
or EM3
Source mode, excluding output
current, duty cycle mode, T = 25
°C
—
1.04
—
μA
Sink mode, excluding output cur-
rent, duty cycle mode, T = 25 °C
—
1.08
—
μA
Source mode, excluding output
current, duty cycle mode, T ≥ 85
°C
—
8.9
—
μA
Sink mode, excluding output cur-
rent, duty cycle mode, T ≥ 85 °C
—
12
—
μA
Output voltage compliance in
source mode, source current
change relative to current
sourced at 0 V
I
COMP_SRC
RANGESEL1=0, output voltage =
min(V
IOVDD
, V
AVDD
-100 mv)
—
0.04
—
%
RANGESEL1=1, output voltage =
min(V
IOVDD
, V
AVDD
-100 mV)
—
0.02
—
%
RANGESEL1=2, output voltage =
min(V
IOVDD
, V
AVDD
—
0.02
—
%
RANGESEL1=3, output voltage =
min(V
IOVDD
, V
AVDD
-250 mV)
—
0.02
—
%
Output voltage compliance in
sink mode, sink current
change relative to current
sunk at IOVDD
I
COMP_SINK
RANGESEL1=0, output voltage =
100 mV
—
0.18
—
%
RANGESEL1=1, output voltage =
100 mV
—
0.12
—
%
RANGESEL1=2, output voltage =
150 mV
—
0.08
—
%
RANGESEL1=3, output voltage =
250 mV
—
0.02
—
%
Note:
1. In IDAC_CURPROG register
2. The IDAC is supplied by either AVDD, DVDD, or IOVDD based on the setting of ANASW in the EMU_PWRCTRL register and
PWRSEL in the IDAC_CTRL register. Setting PWRSEL to 1 selects IOVDD. With PWRSEL cleared to 0, ANASW selects be-
tween AVDD (0) and DVDD (1).
BGM11S Blue Gecko
Bluetooth
®
SiP Module Data Sheet
Electrical Specifications
silabs.com
| Building a more connected world.
Rev. 1.0 | 37