NO
YES
1.
Is the connection cable attached to the tractor
plugged in as far as it will go and engaged?
Insert cable
Step 2.
2.
Is the tractor switched on? (flashes twice)
Switch the tractor on now
Step 3.
3.
Can the cultivator elements be raised and low-
ered using the hand-held transmitter?
Contact the service de-
partment
Cultivator
is in order.
Notice: operation is not possible without the remote control module!
8
SIKU toy models are manufactured according to
the latest safety requirements. Not suitable for
children aged 36 months or under due to small
parts which may be swallowed. Please keep the
packaging as it contains information provided by
the manufacturer. Subject to colour changes and
technical modifications.
Please read the operating instructions
before use and keep them in a safe
place.
BEFORE YOU START:
Remote control module, tractor vehicle
and charger are
not
included!
This SIKU
CONTROL
can be used irrespective of
the selected transmission system. It can be used as
a trailed implement in combination with models
that are controlled by radio and infrared.(Fig.
)
THE FIRST TIME YOU START
Operation with the remote control
module
You can raise and lower the cultivator elements
of this model using the SIKU
CONTROL
remote
control module (Fig.
). Using the data cable at-
tached to the cultivator, please connect the
model with the storage battery or the data port
of the tractor vehicle by plugging the jack plug
of the data cable into the corresponding data
port on the tractor vehicle (Fig.
-
Fig.
). Pro-
ceed by switching the tractor on.
The function of raising and lowering the plough
shares is activated on the remote control module
by moving the joystick. Moving the joystick up will
turn the plough shares clockwise (Fig.
). Mov-
ing the joystick down will turn the plough shares
counter-clockwise.(Fig.
) Moving the joystick up
will lift the cultivator elements. Moving the joystick
down will lower the cultivator elements.
To prevent the drive transmission from becoming
damaged, the transmission is equipped with a
friction clutch of its own.
First aid
Here is a list which may help you correct any faults that may occur.
Operation with remote control module and CONTROL tractor
Caution – Risk of Death!
Never insert data cables into a socket.
Use only the original charger for charging.
The symbols
Data interface for additional equip-
ment
Servo motor
Raise/lower unit
This SIKU
CONTROL
trailed implement
can be used in combination with the
radio-controlled (RC) or the infrared-
controlled (IR) models.
1
6784_DD_BDAL_Layout 1 25.05.12 10:45 Seite 8
