IP-7900-02/-03/7700-02/03 Advanced Operation Guide
88
8
508 nozzles
(Blank for the even
number of heads)
508 nozzles
(All nozzles)
15mm
• [CHECK EDGE SENSOR] print sample
Judge the print results.
Measure the margin of the printing result with a ruler,
and obtain an difference between the measured
margin and the value (15 mm) shown in the
specifications.
If the difference is 0 mm, complate this procedure.
If not, follow the prcedure below to adjust the value.
To obtain the correction value:
Obtain the adjustment value by measuring the margin setting the reference value to 15 mm.
<Example>
The margin is
14 mm
: The adjustment value is
-1.0 mm
.
The margin is
16 mm
: The adjustment value is
+1.0 mm
.
9
á
P R I N T E R
S E T U P
â
ß
A D J U S T
H E A T E R
à
Press the key.
10
# T E S T P R I N T S
> N O Z Z L E P R I N T
With the
key scroll to
[#EDGE SENSOR
ADJ VAL]
.
11
# E D G E S E N S O R A D J V A L
> ± 0 . 0 m m
Press the
key.
12
# E D G E S E N S O R A D J V A L
> ± 0 . 0 m m
,
,
,
Based on the printed edge sensor adjustment
pattern, enter the adjustment value of the edge
sensor position.
13
# E D G E S E N S O R A D J V A L
> + 0 . 5 m m
Press the
key.
Press the key to return to the higher-level
menu.
