IP-7900-02/-03/7700-02/03 Advanced Operation Guide
Move a print start position (nest function)
By moving a print start position, the image is printed on your preferred position.
After printing, rewind the roll, and with this function you can print an image in the blank area.
(First print)
(Media rewound)
(Second print)
Blank
Second image with the print start
position moved
CAUTION
- Complete this operation as immediately as possible. Otherwise the print heads dry, which may cause ink ejection
failure. In such a case perform a cleaning.
1
R E W I N D I N G M E D I A
Rewind the media.
See "Feed or rewind media" on the page 34.
CAUTION
- Rewind the media after the printed image completely
dries. If the media is rewound while the image is not
sufficiently dry, the image may be damaged.
2
P R I N T R E A D Y
R O L L : 1 6 2 5 / P A P E R
Press and hold the
key for 1.5 seconds.
Press and hold the key for 1.5 seconds.
The carriage moves and the nest function is activated.
Align the mark at the lower left of the carriage
cover’s front panel with the origin of the next print
image.
Origin
3
N E S T O R I G I N S E T T I N G
C A R R I A G E M O V I N G
,
Move the carriage with the or key to the
position to be set as an origin.
