IP-7900-02/-03/7700-02/03 Advanced Operation Guide
0
Switch between 4-color mode and 8-color mode
To facilitate this work, set the cleaning liquid packs to the optional ink trays in advance.
R E M O V E
L m 2 S U B C A R T R I D
R E M O V E
L m 2 I N K P A C K
Ink tray
Subcartridge
Ink color
Ink color
（
8-color
）
Ink color
（
4-color
）
Location
Ink color
Location
Location
Ink color
（
8-color
）
Ink color
（
4-color
）
Location
Ink packs after the mode
switch operation
Ink slots assignment
Install each ink pack’s tray and subcartridge at its predetermined position.
Subcartridges after the
mode switch operation
-
The SIIT’s color replacement kit is intended for a single
use only.
Before the mode switch operation, prepare a new
color replacement kit.
To switch 8-color mode to 4-color mode:
Prepare the ink packs for Y, M, C, and K and the subcartridges.
To switch 4-color mode to 8-color mode:
Prepare the ink packs for Lm, Gy, Lc, and LGy and the subcartridges.
Color replacement kit (IP7-122)
Cleaning liquid pack
Dummy subcartridge
Required items
Before the operation check that the items below are prepared.
