7
4
N E S T O R I G I N S E T T I N G
[
O K ?
Press the
key to fix the origin setting.
The carriage returns, and the Printer enters online state
(idle mode) and becomes ready to print.
N E S T O R I G I N S E T T I N G
P L E A S E W A I T
P R I N T R E A D Y
N E S T : 1 6 2 5 / P A P E R
To cancel the origin above, press and hold the key
for 1.5 seconds in the idle mode or raise the pressure
control knob. When the origin is cancelled, the display
returns from
[NEST]
to
[ROLL]
.
<Display when the origin is cancelled>
P R I N T R E A D Y
R O L L : 1 6 2 5 / P A P E R
Print on a cut-sheet media
1
Front cover
Protection bar
Remove the protection bar, and open the front
cover.
2
Wiping unit side
Capping unit side
With pressing the media
edge guard’s your side
part, move each media
edge guard.
Move the media edge guards to each side.
Move the media edge guards to each side so that they
are not under the media.
With pressing the media edge guard’s your side part,
move each media edge guard.
3
Media output side
Pressure control knob
Set the pressure to “Open” by rotating the
pressure control knob.
