IP-7900-02/-03/7700-02/03 Advanced Operation Guide
70
■
Heater preset temperature by medium
The heater preset temperature for each media type is listed below. Preset the heater temperature according to
the media you use.
Medium
Media type
Recommended heater temperature setting
Print mode
Afterheater
Printheater
Preheater
Glossy vinyl
Glossy
45ºC
40ºC
45ºC
NORMAL1, bidirectional
Matte vinyl
Matte
45ºC
40ºC
45ºC
NORMAL1, bidirectional
Banner
Banner
45ºC
40ºC
45ºC
NORMAL1, bidirectional
We recommend that the preheater, the printheater, and the afterheater be set to lower than 50ºC, 45ºC, and 50ºC
respectively.
NOTE
- When the printheater temperature is set too high, the ink fusion on the media is improved, however media wrinkle or mat
print mahy be caused. Adjust heater temperature according to the media type and environmental temperature.
- When the printheater temperature is set to high, the printer may print at low speed to ensure stable print quality.
- Set the preheater/afterheater temperatures 5ºC higher than the printheater temperature. Bad temperature balance between
preheater/afterheater and printheater may cause the media to wrinkle.
- Setting the printheater temperature to high may cause missing dots.
Set the heater preset temperature
1
á
I N K
M E D I A R E G
â
ß
M E D I A
M . A D V
à
Set the Printer to offline state and press the
key.
2
# S E L E C T M E D I A
> 0 1 : P A P E R
[
• • •
With the
key scroll to
[#AFTERHEATER T]
.
3
# A F T E R H E A T E R T
> 0 1 : 4 0 ° C
Press the
key.
4
# A F T E R H E A T E R T
[
0 1 : 4 0 ° C
,
,
,
Enter the heater preset temperature.
Align the digit with the and keys and set the
value with the
and
keys
.
5
# A F T E R H E A T E R T
[
0 1 : 5 0 ° C
Press the
key.
# A F T E R H E A T E R T
> 0 1 : 5 0 ° C
