Customer service information
Instruction Manual PhaseGuard C/ T/ HT
11026E/4
29
There are no special requirements for storing the instruments. However, please note the fol-
lowing information:
The photometer and the control unit contain electronic components. Storage for such
components must fulfill the usual conditions. It is important to note that the storage
temperature must be between -20 and +50°C.
All components that come into contact with the sample during operation have to be
dry and clean for a long period of time before being put into storage.
The photometer, control unit and accessories must be protected from weather fac-
tors, condensing humidity, and aggressive gases.
12.
Packaging & transport
The original packaging materials of the photometer should be used for packaging the pho-
tometer and its peripheral components if possible. If the original packaging is no longer
available, note the following information:
Before packaging the photometer, close the openings on the photometer with adhe-
sive tape or plugs so that no packaging materials can enter the instrument.
The photometer contains optical and electronic components. Make sure that the
packaging protects the instrument from damaging impact during transport.
Package all peripheral devices and accessory parts separately and label each part with
the serial number (serial no.
Section 2.1.7). This prevents confusion and mix-ups
later while also making it easier to identify parts.
When packaged in the way described above, the photometer and control unit can be trans-
ported by the usual shipping methods and in all positions.
Storage
Содержание PhaseGuard C
Страница 36: ...Appendix Instruction Manual PhaseGuard C T HT 32 11026E 4 15 Appendix 15 1 Dimension sheet PhaseGuard MB...
Страница 37: ...Appendix Instruction Manual PhaseGuard C T HT 11026E 4 33 15 2 Overview of gaskets on the PhaseGuard...
Страница 38: ...Appendix Instruction Manual PhaseGuard C T HT 34 11026E 4 15 3 PhaseGuard connection diagram...
