Instruction Manual PhaseGuard C/ T/ HT
Mechanical mounting
14
11026E/4
Figure 4: Correct installation in the vertical or horizontal sample lines
Figure 5: Incorrect
mounting position
5.
Electrical installation
5.1.
Safety pointers for the electrical installation
Dangerous voltage inside the instrument:
Connecting electrical lines can be life threatening. Parts of the system can also be damaged.
Local regulations for electrical installations must be observed at all times.
Further, the following basic principles must be observed:
The power supply 9 .. 30 VDC is to be provided by the customer. It must be stable,
low noise voltage.
Only voltages complying with the local regulations for low voltage may be used as
power supply and on the galvanically separated current output.
Because the unit has no main switch, a suitable disconnection device (switch, plug)
must be installed near the power supply.
If faults cannot be remedied, the unit must be put out of operation and protected
against inadvertent operation.
Mounting position of
the photometer
DANGER!
Содержание PhaseGuard C
Страница 36: ...Appendix Instruction Manual PhaseGuard C T HT 32 11026E 4 15 Appendix 15 1 Dimension sheet PhaseGuard MB...
Страница 37: ...Appendix Instruction Manual PhaseGuard C T HT 11026E 4 33 15 2 Overview of gaskets on the PhaseGuard...
Страница 38: ...Appendix Instruction Manual PhaseGuard C T HT 34 11026E 4 15 3 PhaseGuard connection diagram...
