SIGMATEK DIAS-Drive 335-23, Руководство пользователя

Страница: 21 / 94

DIAS-DRIVE 335-23
27.09.2017 Page 19
1.9 Technical Data
DIM
DIAS-Drive
SDD335-23
Rated values
Rated input voltage (symmetrical opposite to
earth) max. 5000 rms (L1, L2, L3)
V
AC
3 x 230 V
-10%
– 480 V
10%
, 45
– 65 Hz
Max. peak current at power-up moment
(limited by the charging circuit)
A 2.5
Rated power in S1 mode kVA 14
Rated DC-link voltage V
DC
290
– 680
Over voltage protection
– limit for the
intermediate circuit
V
DC
450
– 900
Additional supply v24 V V
DC
22
– 30
Power from the addi24 V W 35
Holding brake 24 V-BR V
DC
25
– 27
Max. holding brake current per axis A
DC
2
Holding brake voltage drop with a load +24 V-
BR
V
DC
Max. 1 (at 3 x 2 A Holding brake current)
Max. switching energy of the holding brake mJ 100
Rated current for axis 1 (rms +/- 3 %) A
rms
10
Max. standstill current for axis 1 starting from
500 ms
A
rms
7
Rated current for axis 2 (rms +/- 3 %) A
rms
10
Max. standstill current for axis 2 starting from
500 ms
A
rms
7
Rated current for axis 3 (rms +/- 3 %) A
rms
15
Max. standstill current for axis 3 starting from
500 ms
A
rms
10.5
Max. continuous sum current of all axes (heat
sink)
A
rms
20
Peak output current axis 1 for a max 5 s (rms
+/- 3 %)
A
rms
20
Peak output current axis 2 for a max 5 s (rms
+/- 3 %)
A
rms
30
Peak output current axis 3 for a max 5 s (rms
+/- 3 %)
A
rms
35
The loss in the power output stage (add the
average current of the 3 axis and multiply by
the factor) without brake unit losses
W /
A
rms
10
Output frequency of the power output stage kHz 8
Maximum output current for 8 V feedback
systems at X6, X7, X8
mA 250
Minimum output current for 8 V feedback
systems at X6, X7, X8
mA 0
Maximum output current for 5 V feedback
systems at X6, X7, X8
mA 250
Minimum output current for 5 V feedback
systems at X6, X7, X8
mA 50
Maximum residual current mA 15