SIGMATEK DIAS-Drive 335-23, Руководство пользователя

Страница: 71 / 94

DIAS-DRIVE 335-23
27.09.2017 Page 69
7.5 Additional Safety Information
The safety module "Safe Restart Lock" is an integral component of the DIAS Drive 3xx and
is already installed with delivery; it meets the conditions required for safe operation
according to SIL 3 in compliance with IEC 62061 and according to PL e in compliance with
EN 13849-1.
Safety modules can only be powered by supplies that meet the requirements for
PELV in compliance with EN60294.
Installation, mounting, programming, initial start-up, operation, maintenance and
discarding of safety modules
can only be performed by qualified personnel .
Qualified personnel in this context are people, who have completed training or
have trained under supervision of qualified personnel and have been authorized
to operate and maintain safety-related equipment, systems and facilities in
compliance with the strict guidelines and standards of safety technology.
For your own safety and the safety of others, use safety modules for their
designated purpose only.
Correct EMC installation is also included under designated use.
Non-designated use consists of
•
Any changes made to the Safety modules or the use of damaged
modules
•
The use of the Safety modules inconsistent with the technical margins
described in these operating instructions
•
The use of the Safety modules inconsistent with the technical data
described in these operating instructions (see the "Technical data"
sections of the respective production).
In addition, observe the warnings in the other sections of these
instructions. These instructions are visibly emphasized by symbols.