SIGMATEK DIAS-Drive 335-23, Руководство пользователя

Страница: 9 / 94

DIAS-DRIVE 335-23
27.09.2017 Page 7
1.2 Safety Guidelines
The safety instructions must be read before installation and initial start-
up of the servo amplifier.
Improper handling of the servo amplifier can
lead to personal injury or material damage. Compliance with the
technical data and connection specifications (nameplate and
documentation) mandatory.
Only qualified personnel may perform tasks such as transportation,
assembly, Initial startup and maintenance.
Qualified personnel are
those who are familiar with the transport, assembly, installation, setup
and operation of the product, and have the appropriate qualifications
for their task.
The machine manufacturer must perform a safety analysis for the entire
machine.
With the appropriate measures, the manufacturer ensures that
no injuries or damage can be caused by unexpected movements.
Improper operation of the servo amplifier or failure to follow the
following guidelines and improper handling of the safety equipment can
result in damage to the machine, personnel injury, electrical shock or in
extreme cases, death.
Annotations
Danger! Shock current
After disconnecting the servo amplifier from the voltage supply, a wait-time of
at least 5 minutes is required before current conducting components of the
amplifier (e.g. clamps) can be touched or connectors removed. After turning
off the voltage supply, the internal capacitors can have dangerous voltage
levels for up to 5 minutes. For safety purposes, measure the voltage in the
intermediate circuit and wait until the voltage is below 40 V.
The electrical connectors of the servo amplifier can never be removed while
voltage is applied. The danger of electrical arcing exists, which could cause
personal injury as well as damage to the contacts.