8KS
8KBS
8 Maintenance and service
66
Version 08/2012, Rev. 1.6 of 04/02/2014 • sb
Translation of the original operating manual
Pos: 211 /10 0 Sigm a/10 0 BA Z entrif uge n (St anda rd mod ule)/ 080 Wart ung und Inst andh altu ng/0 80- 003 0 I nstan dhalt ungs ar beite n @ 7 \mo d_1 306 743 3957 58_ 68. docx @ 43 890 @ 2 @ 1
8.3 Service
DANGER
In the event of service work that requires the removal of the panels, there
is a risk of electric shock or mechanical injury. Only qualified specialist
personnel is authorised to perform this service work.
The centrifuge is subject to high mechanical stress. In order to be able to
withstand this high level of stress, high-quality components were used
during the production of the centrifuge. Nevertheless, wear cannot be
excluded and it may not be visible from the outside. Especially the rubber
parts that are – among other things – part of the motor suspension, are
subject to ageing.
This is why we recommend having the centrifuge checked by the
manufacturer during an inspection once per year in the operating state and
once every three years in the dismantled state. Rubber parts should be
replaced after three years.
Information and appointments:
In Germany:
• Use the service request form at
www.sigma-zentrifugen.de [Service Area]
• or contact
Sigma Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Tel. +49 (0) 55 22 / 50 07-84 25
Fax +49 (0) 55 22 / 50 07-94 25
E-mail: [email protected]
Outside Germany:
Contact our agency in your country. All agencies are listed at
www.sigma-zentrifugen.de [Contacts] [Foreign agencies]
NOTE
• If you would like to utilise our service, please state the type of your
centrifuge and its serial number.
• Please use the request form on our website (see above).
Pos: 212 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1
