manualshive.com logo in svg

Sigma 8KBS, Руководство по эксплуатации

Поделиться
Скачать
Sigma 8KBS Скачать руководство пользователя страница 34

8KS 
8KBS 

 

6 Using the centrifuge 

 

 

 

34 

Version 08/2012, Rev. 1.6 of 04/02/2014 • sb 

Translation of the original operating manual 

 

Pos: 126  /10 0 Sigm a/11 0 BA Z entrif uge n (Pr ojekt e)/8KS_ 8KBS/060 Bet rieb /06 0-0 020 -00 20- 0010    Einse tzen  des R otor s @ 7 \mo d_1 307 433 6637 00_ 68. docx @  44 333  @ 4 @  1 

 

6.2.2.1  Installation of the rotor 

•  Open the centrifuge lid by pressing the lid key. 
•  Unscrew the rotor tie-down screw from the motor shaft (counter-

clockwise). 

•  Lower the rotor with its central bore straight down onto the motor shaft. 
•  Turn the adapter end of the motor shaft anti-clockwise with the supplied 

hexagon socket key (part no. 930 050) and tighten the internal thread of 
the rotor with 20 Nm with the rotor wrench (size 17/19, part no. 
930 018). 

 

 

WARNING 

After frequent use, the rotor tie-down screw must be loosened by some 
turns, the rotor has to be lifted and fastened again. This must be done 
once a day or after 20 cycles. This ensures a proper connection between 
the rotor and the motor shaft. 

 

 
•  Follow the safety instructions and hazard warnings (see chapter 3 - 

"

Safety

")! 

Pos: 127  /01 0 Univ ersal mod ule/                                                             Lee rzeile  @ 0\ mo d_12 021 162 445 00_ 0.doc x @ 1 14 @   @ 1 

 

 

Pos: 128  /10 0 Sigm a/11 0 BA Z entrif uge n (Pr ojekt e)/8KS_ 8KBS/060 Bet rieb /06 0-0 020 -00 20- 0020    Einse tzen v on Win kelro tor en  mit he rm etisch v ersc hließ bar em D eckel @  7\ mod _130 743 366 393 5_6 8.doc x @ 4 434 1 @  4 @ 1 

 

6.2.2.2 

Installation of angle rotors with a hermetically sealed lid 

•   Lower the rotor onto the motor shaft. 
•  Turn the adapter end of the motor shaft anti-clockwise with the supplied 

hexagon socket key (part no. 930 050) and tighten the internal thread of 
the rotor with 20 Nm with the rotor wrench (size 17/19, part no. 930 018). 

 

 

NOTE 

•  Slightly grease the rotor and lid seals after cleaning. 

 

 
•  Screw the rotor cover onto the rotor and tighten it with the supplied tool 

no. 17985 by hand. 

•  The rotors can be installed or removed with a closed lid after loosening 

the rotor tie-down screw. 

•  Follow the safety instructions and hazard warnings (see chapter 3 - 

"

Safety

")! 

 

 

WARNING 

The lid screw serves for the fastening of the lid onto the rotor only, not for 
the fastening of the rotor onto the motor shaft! 

 

Pos: 129  /01 0 Univ ersal mod ule/                                                           Sei tenwe chsel  @ 0\ mod _12 021 1624 431 2_0 .docx  @ 1 05 @   @ 1 

 

 

Содержание 8KBS




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды