manualshive.com logo in svg

Sifos Technologies PowerSync PSA100, Техническое справочное руководство

Поделиться
Скачать
Sifos Technologies PowerSync PSA100 Скачать руководство пользователя страница 85

PowerSync Analyzer Reference Manual 

March 9, 2010 

                                   Sifos Technologies page 

 

85

5. PSE Conformance Test Suite 

5.1. 

PSE Conformance Test Suite Overview 

 

The  PSE Conformance Test Suite for the PowerSync Analyzer is a suite of 802.3af and 802.3at specification 
conformance tests that are designed to evaluate specific characteristics of conforming 802.3 power sourcing equipment 
(PSE).  The test suite runs over the PowerShell System API for the PowerSync Analyzer.   The test suite may also be 
accessed from PSA Interactive graphical user interface software for the PowerSync Analyzer. 
 
Each test provided within the PSE Conformance Test Suite has been engineered to accommodate the generality 
included within the 802.3 Power over Ethernet specification.   As a specification, the 802.3af provides guidelines and 
ranges for various signaling amplitudes and timing.   However, it does not strictly describe all signals utilized in 
detecting, classifying, and connection-checking thus placing burden on test methods to adapt to vendor-specific 
implementations of the specification.  Some PSE variants covered by the version 

3.4 PSE Conformance Test Library

 

include various forms of pre-detection (pre-qualification), zero back-off / rapid back-off detection, and integrated 
(interlaced) 802.3 and legacy detection schemes. 
 
Furthermore, many PSE’s are consciously designed to provide coincidental support for both 802.3 and non-standardized 
“legacy” mode Power Over Ethernet.   The PSE Test Library has the ability to adapt to certain PSE’s that are operating 
in a “hybrid” 802.3+legacy mode.  While this mode is not strictly 802.3 compliant, the 802.3 components can still be 
conformance tested using the PSE Conformance Test Suite. 
 
The conformance tests that comprise the test library may be sequenced in arbitrary order on arbitrary groups of 
PSE ports using the sequencing facilities described above in Sections 

3.2.2

 and 

4.13

.   The API command 

psa_tests

 will 

return a list of PSE Conformance Tests in PowerShell. 
 

It is strongly recommended that any devices connected to PSA Test Port “OUT” ports be removed before performing 
PSE Conformance Tests.  Certain PSE Conformance Test parameters can be affected by interactions between PSE port 
signaling and EMI terminations found on many LAN ports that were not designed for PoE compatibility.  Generally, 
Sifos Technologies does not recommend performing PSE Conformance Tests simultaneously with LAN data traffic 
because PSE Conformance Testing requires many PoE power cycles that will most likely disrupt that LAN data traffic 
severely. 

5.2. 

Global PSE Description Parameters 

The 

PSE Conformance Test Suite

 has been designed to accept several “global” parameters that describe each PSE 

port.   Using this information, the test library automatically adapts and optimizes testing for accuracy and speed. 

 

Property 

Powershell 
Global 
Parameter 

Definition 

Value Range 

PSE Config 

psaPseClass 

Defines whether PSE is an EndSpan or MidSpan type of 
PSE.   This information is used primarily in Conformance 
Test Report limit analysis. 

EndSpan MidSpan 

PSE MPS 
Method 

psaPseMps

 

Defines whether the PSE port utilizes the AC or DC method 
of “Maintain Power Signature” – the disconnection 
detection method.  This must be defined to enable the 
proper test suite and power-down methods. 

AC DC 

30W Grant 
Method 

psaPseHpGrant 

Defines how “Type-2” PSE’s capable of delivering at least 
30W of power will grant Class 4, Type-2 power to a PD.   
Value will be 

NONE

 for Type-1 PSE’s since these cannot 

provide 30W power levels. 

PHY LLDP 

 

Two PSE characteristics that are 

NOT

 globally defined to PSE Conformance Testing are: 

 

ALT A/B

 (pairs):  The PowerSync Analyzer must be pre-configured to the proper powered pairs by the user 

prior to executing the PSE Conformance Test Suite.   This allows the user flexibility in operating test libraries 
over ports that might support both modes. 
 

Содержание PowerSync PSA100




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды