manualshive.com logo in svg

Sifos Technologies PowerSync PSA100, Техническое справочное руководство

Поделиться
Скачать
Sifos Technologies PowerSync PSA100 Скачать руководство пользователя страница 141

PowerSync Analyzer Reference Manual 

March 9, 2010 

                                   Sifos Technologies page 

 

141

9. PoE Service Analyzer Application 

 

The PowerSync Analyzer 3.2 software release includes a fully automated test application and reporting tool for testing 
PoE Service to a PD.   This application allows each PSA test port to function as a highly sophisticated service analyzer 
at the 802.3af PD interface (or service outlet). 
 
The 

PoE Service Analyzer

 application is accessible through either PSA Interactive or PowerShell.   This section will 

introduce the types of testing performed by the PoE Service Analyzer and the associated reporting available.   It will 
also present configuration alternatives including support for “in-band” instrument control from a remote host.   Finally, 
it will overview the additions to PSA Interactive and PowerShell that access the PoE Service Analyzer. 

 

9.1. 

PoE Service Access Tests 

 

The 

PoE Service Analyzer

 combines PowerSync Analyzer test ports with specialized application software to enable 

the most comprehensive and fully automated testing available for PoE analysis and qualification at a Powered Device 
service access point.   The tests available go well beyond standard power-up and line voltage measurements found in 
low cost, hand-held analyzers.  The PoE Service Analyzer will fully assess 

interoperability risks

, 

safety hazards

, and 

PoE 

performance limitations

 at the connection to any Powered Device. 

 
The PoE Service Analyzer provides fully automated testing in 3 categories: 
 

Basic Service Tests

 evaluate the basic Power-over-Ethernet connection, reporting connection information such as 

powered pairs (including multiple PoE sources), power polarity, and the ability of the PoE service to power up typical 
(and nominal) Class 0, Class 1, Class 2, and Class 3 Powered Devices*. 

 

Parameter 

Description 

Range of Outcomes 

PD_Class_0:

 

Ability of service to power typical Class 0 PD 

ENABLED / DISABLED 

PD_Class_1:

 

Ability of service to power typical Class 1 PD 

ENABLED / DISABLED 

PD_Class_2:

 

Ability of service to power typical Class 2 PD 

ENABLED / DISABLED 

PD_Class_3:

 

Ability of service to power typical Class 3 PD 

ENABLED / DISABLED 

CONNECTION: 

Powered Cable Pairs (number of services) 

ALT A, ALT B,  
ALT A+B (redundant) 

POLARITY: 

Power Polarity (per Powered Pair) 

MDI(positive) /  
MDI-X(negative) 

 

 

Parametric Tests

 report a number of parameters of the PoE service that are relevant to interoperability of all PD’s at 

the PoE service outlet.  Additionally, certain safety related behaviors of the PoE service are analyzed.   Information 
collected includes line voltages (DC and AC) at power extremes, detection signature range verification, rejection 
signature range verification, inrush and overload tolerance of the PoE connection, disconnect timing, and overload 
timing response of the PoE connection.  In performing these tests, the PowerSync

®

 Analyzer is utilized to emulate a 

wide range of IEEE 802.3af compliant steady state and transient Powered Device behaviors. 

 

Parameter 

Description 

Range of Outcomes 

DCV_(1W): 

PoE Line Voltage to Low Power PD 

to assure valid line voltage to low power PD  (36 to 57 VDC)

 

0 – 60 VDC 

PASS / FAIL  

ACV_(1W): 

PoE Line Noise to Low Power PD 

to assure “clean” DC line voltage to low power PD (< 0.5 Vpp)

 

0 – 5 VAC 

PASS / FAIL 

DCV_(13W): 

PoE Line Voltage to High Power PD 

to assure valid line voltage to high power PD (36 to 57 VDC)

 

0 – 60 VDC 

PASS / FAIL 

ACV_(13W): 

PoE Line Noise to High Power PD 

to assure “clean” DC line voltage to high power PD (< 0.5 Vpp)

 

0 – 5 VAC 

PASS / FAIL 

MIN_DETECT: 

Power Applied to Valid Low-End PD Signature 

to assure all Valid PD’s are detected properly (24 Kohm)

 

PASS / FAIL 

MAX_DETECT: 

Power Applied to Valid High-End PD Signature 

to assure all Valid PD’s are detected properly (26 Kohm)

 

PASS / FAIL 

Non802_DET: 

Power Applied to Capacitive Load, Invalid 802.3af PD 

to note capability of PSE to power many “legacy”  PD’s

 

NONE /  

Non802-Detect 

MIN_REJECT: 

Rejection of Invalid Low-End PD Signature 

to assure that  non-PoE devices  do not get powered  (15 Kohm) 

PASS / FAIL 

Содержание PowerSync PSA100




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды