Sierra InnovaMass 240i Series, Инструкция по эксплуатации, Страница: 78 / 115

78
Press enter key

and use the use the

buttons to enter the desired numeric value, and
then press the enter key

to save the value.
Press the right

key to continue to the pressure value that corresponds to the 20mA output.
In the example screen above, if your pressure units are psia then 30.00 psia would correspond to
the pressure 20mA output.
Press enter key

and use the use the

buttons to enter the desired numeric value, and
then press then press the enter key

to save the value.
If you change this value, be sure not to enter a pressure for 20mA greater
than the full scale of the pressure option you ordered or you would be over
the range of the transducer.
If you change these pressure “Low and High” 4-20mA values the pressure
accuracy is still based on the or/-1% of full scale of the pressure
transducer option ordered.
Temperature Outputs:
Press the right


key to continue to the temperature value that corresponds to the 4mA output.
The temperature units above are the current temperature units you ordered or that you have
changed in the calibration sub-menu. In the example above, if your temperature units are °F then
32.00°F would correspond to the temperature 4mA output.
Press enter key

and use the use the

buttons to enter the desired numeric value, and
then press the enter key

to save the value.
Press the right

key to continue to the value that corresponds to the 20mA output.
In the example above, if your temperature units are °F then 212.00°F would correspond to the
temperature 20mA output.
Pressure 4mA
0.00
Pressure 20mA
30.00
Temp. 4 mA
32.00
Temp. 20 mA
212.00