Siemens SONOLINE G50, Инструкция по эксплуатации, Страница: 34 / 229

2 S a f e t y a n d C a r e
[ 1 ] I N S T R U C T I O N S F O R U S E
2 - 1 5
WARNING: To maintain the safety and functionality of the ultrasound system,
maintenance must be performed every 12 months. Electrical safety tests must
also be performed at regular intervals as specified by local safety regulations, or
as needed.
Caution: To avoid the possibility of static shock and damage to the system,
avoid the use of aerosol spray cleaners on the monitor screens.
Caution: Do not use spray cleaners on the ultrasound system, as this may
force cleaning fluid into the system and damage electronic components. It is
also possible for the solvent fumes to build up and form flammable gases or
damage internal components.
EMC Note: Operating the ultrasound system in close proximity to sources of strong
electromagnetic fields, such as radio transmitter stations or similar installations may lead
to interference visible on the monitor screen. However, the device has been designed and
tested to withstand such interference and will not be permanently damaged.
Level of Protection Against Electrical Shock
ƒ
Transducers
WARNING: Only use Type BF transducers with the ultrasound system to
maintain a level of protection against electrical shock.
According to EN 60601-1 and IEC 60601-1, the assemblies for the
endocavity transducer and the linear, curved, and phased array transducers
provide a "Level of Protection Against Electrical Shock" of "Type BF."
The Type BF icon is located on the transducer label.
Defibrillators
WARNING: The ECG function is designed to withstand the effects of
defibrillation. However, when possible, disconnect the ECG leads during
defibrillation since a malfunction of the safety controls could otherwise result in
electrical burns for the patient.
For patient safety, be sure to use defibrillators that do not have grounded
patient circuits.