Siemens SONOLINE G50, Инструкция по эксплуатации, Страница: 224 / 229

6 T e c h n i c a l D e s c r i p t i o n
[ 1 ] I N S T R U C T I O N S F O R U S E
6 - 2 3
System Requirements
This section describes the power and environmental requirements for the
ultrasound imaging system.
Power Supply Requirements
MAINS Voltage Range Maximum Current Frequency
230V ~ 195.5V~ to 264.5V~ 5.37 amps 50/60 Hz
115V ~ 97.75V~ to 132.25V~ 10.74 amps 50/60 Hz
100V ~ 90.0V~ to 110V~ 11.67 amps 50/60 Hz
Possible Combinations with
Other Equipment
Only the peripheral devices listed in the System Reference are approved for
use with the ultrasound system. Any use of other devices with the system
will be at the user's risk and may void the system warranty.
On-board peripheral devices must be installed by an authorized Siemens
representative or approved third party.
WARNING: Accessory equipment connected to the analog and digital
interfaces must be certified according to the respective EN and IEC standards (e.g.,
EN 60950 and IEC 60950 for data processing equipment and EN 60601-1 and
IEC 60601-1 for medical equipment). Furthermore, all configurations shall
comply with the system standards EN 60601-1-1 and IEC 60601-1-1. Anyone
who connects additional equipment to the signal input or signal output ports
configures a medical system and is therefore responsible that the system
complies with the requirements of the system standards EN 60601-1-1 and
IEC 60601-1-1. Siemens can only guarantee the performance and safety of the
devices listed in the Accessories and Options chapter. If in doubt, consult
Siemens service department or your local Siemens representative.
Leakage Currents
WARNING: Connecting peripheral products and accessories from non-isolated
sources may result in chassis leakage current exceeding safe levels.
System Reference
Accessories
and Options Ch 2