Siemens SONOLINE G50, Инструкция по эксплуатации, Страница: 168 / 229

4 S y s t e m S e t u p
[ 1 ] I N S T R U C T I O N S F O R U S E
4 - 2 5
Input/Output Panel Connections
Audio and video connections are located on the input/output panel located at
the rear of the shelf under the control panel.
WARNING: Accessory equipment connected to the analog and digital
interfaces must be certified according to the respective EN and IEC standards
(for example, EN 60950 and IEC 60950 for data processing equipment and
EN 60601-1 and IEC 60601-1 for medical equipment). Furthermore, all
configurations shall comply with the system standards EN 60601-1-1 and
IEC 60601-1-1. Anyone who connects additional equipment to any signal input
or signal output ports configures a medical system and is therefore responsible
that the system complies with the requirements of the system standards
EN 60601-1-1 and IEC 60601-1-1. Siemens can only guarantee the performance
and safety of the devices listed in the
System Reference . If in doubt, consult
the Siemens service department or your local Siemens representative.
Caution: To ensure proper grounding and leakage current levels, it is the policy
of Siemens to have an authorized Siemens representative or approved third party
perform all on-board connections of documentation and storage devices to the
ultrasound system. The
System Reference lists the peripheral devices specified
for use with the ultrasound system.
System Reference
Accessories
and Options Ch 2