4 S y s t e m S e t u p
[ 1 ] I N S T R U C T I O N S F O R U S E
4 - 3 1
General System Settings
You can change general system settings such as the on-screen display of
the date, time, and hospital name using the system presets. These settings
display on the image screen as well as on patient reports.
Note:
If the setup menus are accessed when the system is in freeze, you must unfreeze
the system to display the changes.
Modifying Hospital or Clinic Name
To change the hospital or clinic name, enter a new name into the
system preset.
To change the hospital name:
1. Press the
F4
key on the keyboard to access the system presets.
The system displays the
Preset Main Menu
screen.
2. Roll the trackball to
General
on the left of the screen and then press the
SET
key on the control panel.
3. Roll the trackball to
Hospital
Name
, and then press the
SET
key.
4. Enter a name and then press the
SET
key. You can enter up to
60 characters.
5. Roll the trackball to
Save
and then press the
SET
key to store the new
settings and exit the system presets.
System Reference
System Presets
Ch 3
F4
General
Ź
Hospital Name
Содержание SONOLINE G50
