3 S y s t e m C o n t r o l s
3 - 4 6
[ 1 ] I N S T R U C T I O N S F O R U S E
ECG LCD Selections
When ECG is active, you can access the related LCD selections by rotating
the
FUNCTION SELECT
control on the LCD panel to highlight the
ECG
tab
on the LCD.
Use the system presets to enable the ECG function to automatically activate
when an exam type is selected.
LCD Selection
Description
Settings
|
On/Off
Activates (
On
) the ECG function.
On, Off
|
CH 1 Delay
Selects the channel 1 trigger point in the cardiac cycle
where the system updates the image from ventricular
depolarization, or the 'R' value of the ECG tracing.
0 ms to 990 ms in
increments of 10
|
Position
Adjusts the vertical position of the ECG trace on the
image screen.
0 to 31 in
increments of 1
|
Gain
Increases or decreases the trace amplitude.
0 to 15 in
increments of 1
|
CH 2 Delay
Selects the channel 2 trigger point in the cardiac cycle
where the system updates the image from ventricular
depolarization, or the 'R' value of the ECG tracing.
0 ms to 990 ms in
increments of 10
|
External
Activates (
On
) the external ECG function.
On, Off
|
Single
Selects Single or Dual trigger within one cardiac cycle.
Sngl, Dual
|
Trigger
Enables ECG-triggered acquisition of 2D-mode data.
On, Off
F4
Default Setting
Ź
ECG
Содержание SONOLINE G50
