Siemens SISTORE AX4 Lite 1000/100 Скачать руководство пользователя

Страница: 8 / 118

Safety

Siemens AG

06.2010

1.2.1 Transport

Damage during transport

Keep the packaging material for future transportation.

Do not expose the device to mechanical vibrations or shocks.

1.2.2 Installation

Damage due to unsuitable mounting location

The environmental conditions recommended by the manufacturer must be

observed (see Section 3: Technical data).

Do not operate the device close to sources of powerful electromagnetic radiation.

Do not operate the device in dusty places.

The device should only be used for indoor applications.

Do not expose the device to mechanical vibrations or shocks.

Protect the device against moisture.

Cable damage due to mechanical load

Make sure that cables are not under stress, kinked or damaged.

Damage to the device due to lack of ventilation

Do not block or cover the ventilation openings of the device.

Do not stack several devices on top of each other and do not place any objects on

the device.

Place this equipment only in an upright position. This equipment has an open-

frame Switching Mode Power Supply (SMPS), which can cause a fire or electric
shock if anything is inserted through the ventilation holes on the side of the
equipment.

Danger of electrical shock due to incorrect connection

Use the device only in conjunction with a power supply cable that has been

approved in your country and complies with the national standards.

This product is designed for TN power systems and for IT power systems in

Norway with 230 V phase-to-phase voltage. Do not connect the device to any
other IT power systems.

Damage to the device due to overvoltage

Connect the device only to power sources with the specified voltage. Voltage

supply requirements can be found on the type label (see Section 3: Technical
data).

Содержание SISTORE AX4 Lite 1000/100























































































































Результаты поиска

Содержание SISTORE AX4 Lite 1000/100

Отзывы:

Похожие инструкции для SISTORE AX4 Lite 1000/100

Бренды по названию

Популярные бренды

Siemens SISTORE AX4 Lite 1000/100, Руководство по конфигурации и эксплуатации

Результаты поиска

Содержание SISTORE AX4 Lite 1000/100

Отзывы:

Похожие инструкции для SISTORE AX4 Lite 1000/100

Бренды по названию

Популярные бренды