Configuration
26
Siemens AG
06.2010
Fig. 14
Pre-Event setup screen
When the DVR is in the Event Record mode it is possible to have it record images
before the event occurs. The
Pre-Event
screen allows you to define how to handle
pre-event recording.
You can turn individual cameras On or Off for pre-event recording. The image speed
can be set from 0.10 to 25.00 ips (30.00 ips NTSC), and image quality can be
selected from Very High, High, Standard and Basic.
You can set the amount of time to record prior to the event by adjusting the dwell.
You can set the dwell from 5 seconds to 30 minutes. The longer the dwell set, the
fewer maximum ips can be set.
NOTE
When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings and follows the
time settings.
Î
You can save your changes by highlighting
Save
and pressing the button.
Î
Selecting
Cancel
exits the screen without saving the changes.
7.8 Network
setup
In the main screen, use the Left or Right arrow buttons to display the
Network
menu.
Fig. 15
Network menu
