Configuration
44
Siemens AG
06.2010
Fig. 38
Video Loss Actions screen
The DVR can be set to react to video loss differently for each camera. Each camera
can be associated with another camera, trigger an Alarm-Out connector, sound the
DVR’s internal buzzer, notify a number of different devices, and/or move PTZ
cameras to preset positions.
1.
Highlight the box under the
Record
heading and press the button.
Î
A list of cameras appears.
You can associate as many cameras with that camera as you wish. If the DVR
detects video loss on the selected camera, it starts recording video from all the
associated cameras.
NOTE
For the
Record
action, the camera you select should be set to the Event or Time & Event recording
mode in the
Record Schedule
setup screen.
2.
Highlight the box under the
Alarm-Out
heading and press the button.
3.
Select between Alarm Output and Beep (DVR’s internal buzzer) that you would
like to activate and to sound whenever the DVR detects video loss on the
selected camera.
NOTE
For the
Alarm-Out
action, the alarm output and beep you select should be set to the Event mode in
the
Alarm-Out
setup screen (
Schedule
tab).
4.
Highlight the box under the
Notify
heading and press the button.
You can toggle the entire list On and Off by highlighting
Notification
and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the button.
5.
Highlight
OK
and press the button to accept your changes.
NOTE
For the
Notify
action, the notify item you select should be enabled in the
Notification
setup screen
and the DVR should be registered in the RAS (Remote Administration System).
