Configuration
41
Siemens AG
06.2010
Fig. 34
Motion Detection Zone menu
Select
Activates highlighted blocks to detect motion.
Clear
Deactivates highlighted blocks so that they will not detect motion.
Reverse
Activates inactive highlighted blocks and deactivates active highlighted blocks.
Select All
Activates all blocks to detect motion.
Clear All
Deactivates all blocks so that they will not detect motion.
Reverse All
Activates inactive blocks and deactivates active blocks.
OK
Accepts changes and closes Zone setup.
Cancel
Exits Zone setup without saving changes.
You can control excessive event logging and remote notification of motions detected
after the motion dwell time by adjusting the motion ignoring dwell intervals.
Highlight the box beside
Motion Ignoring Interval
and press the button.
Î
A list of intervals ranging from 1 to 5 seconds or "Never" appears.
Î
The DVR will not log and notify motion events occurred during the preset interval
range.
NOTE
The record action for motion events will not be affected by the
Motion Ignoring
function.
Highlighting
Daytime Setup
and pressing the button allow you to set up the
Daytime
range.
Fig. 35
Daytime Setup screen
1.
Highlight the box beside
Daytime
and press the button.
2.
Use the Up and Down arrow buttons to set the
Daytime
range.
Î
The DVR will consider the remaining time range as the Nighttime.
3.
Highlight the
Actions
tab.
Î
The
Motion Detection Actions
screen displays.
