Siemens SISTORE AX4 Lite 1000/100 Скачать руководство пользователя

Страница: 7 / 118

Safety

Siemens AG

06.2010

1 Safety

1.1 Target

readers

The instructions in this document are designed

only

for the following target readers:

Target readers

Qualification

Activity

Installer

Technical training for building
or electrical installations.

Installs the product, individual
components of the product or
replacement parts.

Operational startup
personnel

Technical training for building
or electrical installations.

Training on the product is
recommended.

Puts the product into operation for
the first time, or changes the
existing configuration.

End user

Has working knowledge of
computers.

Instruction by technical
specialists is necessary.

Performs only the procedures for
proper operation of the product.

Service personnel

Technical training for building
or electrical installations.

Checks the product at regular
intervals to ensure that it is in good
working order and performs service
work.

1.2

Work safety information

Read the general safety precautions before operating the device.

Keep this document for reference.

Follow all warnings and instructions marked on the device.

Always pass this document on together with the device.

Any national or local safety standards or laws that apply to the development,

design, installation, operation or disposal of a product must be adhered to in
addition to the instructions in the product documentation.

Radio interference with other devices in the environment

This is a Class A device. This equipment may cause radio interference in a

residential installation. In this case the user is encouraged to perform appropriate
measures to correct the interference.

Liability claim

Do not connect the device if it is damaged or any parts are missing.

Do not make any changes or modifications to the device unless they have been

approved by the manufacturer.

Use only spare parts and accessories that have been approved by the
manufacturer.

Содержание SISTORE AX4 Lite 1000/100























































































































Результаты поиска

Содержание SISTORE AX4 Lite 1000/100

Отзывы:

Похожие инструкции для SISTORE AX4 Lite 1000/100

Бренды по названию

Популярные бренды

Siemens SISTORE AX4 Lite 1000/100, Руководство по конфигурации и эксплуатации

Результаты поиска

Содержание SISTORE AX4 Lite 1000/100

Отзывы:

Похожие инструкции для SISTORE AX4 Lite 1000/100

Бренды по названию

Популярные бренды