Configuration
63
Siemens AG
06.2010
Fig. 62
Alarm-Out Schedule setup screen
You can add and edit alarm output schedules on this screen. Highlight the "+" and
press the button to add a schedule. Highlighting the boxes under the column
heading and pressing the button allow you to edit the information in those boxes.
The
Day
box allows you to select the days that the alarm schedule will be active.
The choices are: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
The
Range
box allows you to set the time that the alarm schedule will be active in
15-minute increments from 00:00 to 24:00.
The
Mode
box allows you to set how the alarm reacts during the scheduled time.
When set to On, the Alarm-Out is active during the scheduled time. When set to
Event, the Alarm-Out is only active when there is an Event during the scheduled time.
The
Alarm-Out
box allows you to select between Alarm Output and Beep (DVR’s
internal buzzer).
The box allows you to delete an alarm output schedule. You will be asked to
confirm whether or not you really wish to delete the schedule.
Î
You can save your
Alarm-Out
changes by highlighting
Save
and pressing the
button.
Î
Selecting
Cancel
exits the screen without saving the changes.
