manualshive.com logo in svg

Siemens SISTORE AX16, Руководство пользователя, Страница: 7 / 92

Поделиться
Скачать
Siemens SISTORE AX16 Скачать руководство пользователя страница 7

Preface 

Preface 

Compliance notice of FCC 

 

This equipment has been tested and found to comply with the limits for a CLASS A 
Digital Device, pursuant to part 15 of the FCC rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses, and can 
radiate frequency energy and if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful 
interference, in which case users will be required to correct the interference at their 
own expense.  

 

 

 

 

 

 

WARNING 

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment. This class 
of digital apparatus meets all requirements of the Canadian Interference-
causing Equipment Regulations. 

 

 

 

 
The information in this manual is believed to be accurate as of the date of 
publication. Siemens is not responsible for any problems resulting from the use 
thereof.  The information contained herein is subject to change without notice.  
Revisions or new editions to this publication may be issued to incorporate such 
changes. 

7

 

Siemens Building Technologies

 

 

SISTORE AX9 AX16_EN.doc

Fire & Security Products 

 

09.2004

 

 

Содержание SISTORE AX16





























































































Отзывы:

Нет отзывов